WIZ811MJ WIZNET代理

来源： | 发表于：2011年11月04日

WIZ811MJ产品信息
WIZNET 品牌系列产品 WIZ811MJ 批号 11+ WIZ811MJ 数量 580 WIZ811MJ 封装 WIZ811MJ 包装 WIZ811MJ 备注 WIZNET一级代理商 WIZ811MJ 询价-热线电话：0755-83278427 83614893 15338790961

WIZ811MJ 特征

- 插针式模块化设计
- 集成W5100、滤波器、RJ45
- 基于多种MCU的快速评估版
- 支持4个Socket同时连接
- 支持8位数据总线和串行SPI
- 10/100Mbps自适应以太网接口
- 支持网络状态指示灯
- 尺寸：55.2 x 25 x 22.5 mm

规格(WIZ810MJ vs. WIZ811MJ vs. WIZ812MJ)

		WIZ810MJ	WIZ811MJ	WIZ812MJ
Architecture	TCP/IP	W5100
	PHY	Embedded in W5100
	Mag Jack	RDA-125BAG1A
	Interface	10/100 Base-T Ethernet (Auto Detection)
Network	Protocol	TCP, UDP, IP, ARP, ICMP, IGMP, PPPoE, MAC
Dimension(mm)		52 x 25 x 21 (W x H x D)	55.5 x 25 x 23.5 (W x H x D)	55.5 x 25 x 23.5 (W x H x D)
Connector Type		2mm pitch 14 x 2 header	2.54mm pitch 10 x 2 header	2.54mm pitch 10 x 2 header J2:9 GND ->RX_LED J2:10 GND ->TX_LED J2:19 GND ->LINK_LED
PCB Through Hole		X	Two PCB Throughhole (ø3.00mm)	Four PCB Throughhole (ø3.00mm)
SPI Signal Pin		Shared for SPI and BUS signals	Separated for SPI signals (SPI_EN controlled by /SCS signal)	Separated for SPI signals (SPI_EN controlled by /SCS signal)
LINK LED		When the link is established, LED is on and flashes at the TX or RX		When the link is established, LED is on, but not flashes at the TX or RX
Input Voltage		3.3V internal operation and 5V tolerant I/Os
Power Consumtion		10/100 baseT max. 185mA (3.3V)

订货信息

深圳安芯达电子/联系电话：0755-83278427 QQ:632772330 林小姐

上一页：WIZ812MJ网络模块
下一页：WIZ810MJ网络模块

订购热线：
0755-83278427
0755-83614893

传真：
0755-83278427/83612291

QQ:

Email:li@anxida.com

地址：深圳市福田区华强北路1002号赛格广场2435